Home • Industrial fans and air heaters • Industrial air heating and cooling equipment • Heating/Cooling Fans

Heating/Cooling Fans

DESCRIPTION

The air heating unit worms the air using the heat of hot or overheated water or steam coming from external sources of heat supply and is designed for air heating (including standby heating) of industrial premises, the technological process of which is not accompanied by any release of dust or explosive gases.

The unit should be operated in areas with a temperate climate. The heat transfer agent temperature should not be higher than 180°C and the pressure should be not higher than 1.2 MPa.

Principle of operation:

When the fan is in operation, the air is taken from the room and heated up as it passes through the air heater. Air heater consists of finned tubes with working media hot water or steam. Then it is ducted through the fan working wheel blades into the heated area.

If heat transfer agent change on cool fluid then the unit works as cooling equipment.

Technical Specification of Electrical Air Heating Fans EKU

*No.*	*Parameter*	EKU -12	EKU -21	EKU -25	EKU-42	EKU -64	EKU - 90
1	Rated Power, kWt	12	21	26,25	42	64	90
2	Max. Air capacity, m³/h	1000	1000	2500	3000	5000 3000	11000
3	Max. Difference of temperature inlet and outlet air °С
	1 working mode	25	30	25	30	15 30	15
	2 working mode	35	35	35	55	25 55	25
	3 working mode		45			35 65	35
4	Max. Temperature of outlet air °С	100
5	Max. temperature on the heating element surface, °С	250. Thermostat controller under request
6	Max. air pressure over the air, Pa	250
7	Number of rows of electro heating elements	2	3	2	2	3	3
8	Power of row, kWt	6	7	12,5 13,75	21	21,3	30
9	Protection level	1Р30
10	Scheme of electro heating elements connection in section	Star
11	Mains voltage, V	380
12	Electro heating elements voltage, V	220
13	Frequency,Hz	50
14	Number of phases	3
15	Fan	VO-06-300-3,15		VO -06-300-4,0			VO -06-300-6,3
16	Fans Impeller rotation frequency, min -1	1500	1500	1500	1500	3000 1500	1500
17	Installed fan power, kWt	0,18	0,18	0,18	0,18	0,75 0,25	1,1
18	Gap between fans impeller and fans case	1,0 ^+1,0
19	Max. Weight (netto), kg	40	45	53	55	67 62	90

SEND A REQUEST

Type of certificate	Management System Certification
No.	34227
Name	ISO 9001:2015
Given by	Certification System GOST R
Date of validity	2021-11-21
Description	The quality management system of design and manufacturing products satisfy the requirements of ISO 9001:2015

Type of certificate	Product Certifications/Testing Reports
No.	0490160
Name	CERTIFICATE OF CONFORMITY for BENCH VICES
Given by	Certification System GOST R
Date of validity	2022-12-25
Description	Bench Vices (FEACN Code 8205 70 000 0) correspond the requirements of the Specification Documents on Technical Conditions TU 3928-018-02962743-01, TU 3926-022-00224633

Type of certificate	Product Certifications/Testing Reports
No.	0490381
Name	CERTIFICATE OF CONFORMITY for MACHINE VICES
Given by	Certification System GOST R
Date of validity	2022-12-25
Description	Machine Vices (FEACN Code 8466 20 980 0) correspond the requirements of the Specification Documents on Technical Conditions TU 396131-03-02962743-94

Type of certificate	Product Certifications/Testing Reports
No.	ЕАЭС RU C-RU.MЮ62.B.00953/19
Name	CERTIFICATE OF CONFORMITY for EXPLOSION PROOF MINE FANS
Given by	Certification System GOST R
Date of validity	2024-08-22
Description	Mine Fans correspond the requirements of the Eurasian Customs Union Technical Regulations TP CU 012/2011 “On safety of the equipment for working in explosion hazardous areas”

Type of certificate	License for manufacturing
No.	BO-(C)-12-101-3407
Name	License for NPP equipment manufacturing
Given by	Federal Atomic Supervision Service
Date of validity	2023-01-26
Description	The license gives right to manufacture equipment for nuclear power units

Heating/Cooling Fans

DESCRIPTION

EKU -12

EKU -21

EKU -25

EKU-42

EKU -64

EKU - 90