RUSSIAN MANUFACTURER
Home  •  Industrial fans and air heaters  •  Industrial air heating and cooling equipment  •  Spray Cooling fans and Man coolers on stand

Spray Cooling fans and Man coolers on stand

DESCRIPTION

Industrial water spray cooling fans are designed for spraying of humidified and cooled air on workplaces in hot workshops of iron and steel, coke-chemical and machine-building plants and for other similar purposes (at the ambient temperatures of up to +40°C). 

 

Industrial water spray cooling fans are installed near equipment generating maximum heat: dryers, rollers, calenders, vulcanizing and hydraulic presses, etc. The industrial fans are used at mining and processing plants, metallurgical plants and just for cooling hot workshops or production facilities in hot weather. It is often used as Man cooler in hot workshops if water feed is cut off or the model initially is without water feed. 

 

Setup and Principles of Operation

The industrial water spray cooling fan has a vertical design and consists of the following main units: axial fan, support, housing, compressed air supply cock, water supply cock, nozzle, and guard.

 

After turning on the industrial water spray cooling fan, the cocks regulate the compressed air supply, and the water is evenly supplied in the amount sufficient for humidification.

 

The industrial water spray cooling fan without the water supply is used as a blower fan at enterprises of other industries. Industrial Man cooler is used at workshops without conditioner. 

 

Terms of Use ambient temperature from -40°C to +40°C, relative humidity up to 80% at 25°C in a temperate climate.

  TECHNICAL SPECIFICATION


Water spray cooling fan
PAM-24
PAM-32

 Electromotor – input power, frequency 

4 kWt, 

50 Hz

5,5 kWt, 

50 Hz

 Motor rotation speed, min-1 

1420

1455

 Compressed air pressure for the nozzle,  MPa

0,5

0,5

 Max. compressed air discharge, m3/hour

140

140

 Max. water discharge, liter/hour 

30

50

 Connection dimensions for water and compressed air feed

1/2″

1/2″

 Impeller diameter, mm

800

800

 Impeller blade quantity

6

6

 Weight netto, kg

195

210

 IP Classification

IP20

IP20


totop